Driver installation – Airlink101 AGIGA32PCI User Manual

Page 2

Text mode
Original mode

Step 5

Replace the computer’s cover and connect the network cable to the

newly installed network Adapter. Reconnect the computer’s power cord and
plug it into the power outlet.

Driver Installation

Usually for Windows XP or above, the adapter’s driver is already included in
the OS, and after you install the network adapter, your system will
automatically install the driver for you.

For other operating systems, before you connect the PCI Adapter to the
network, you have to install the adapter’s driver first. The driver for each
operating system is under a separate folder of the provided compact disk.

Note: The following steps and screen shots are for Windows XP. Steps for
other Windows operating systems will be noted beneath each screen shot if
different.

Step 1

At the Found New Hardware Wizard, select Install from a list or

specific location (Advanced) and click Next.

Section 2