Panasonic FV-08VFL3 - Manual (Page 8)

13 1/4~15 1/ 2(336~394)
16 1/ 2~18 3/ 4(419~480)
21 1/ 4~23 1/ 2(540~597)
A
INSTALLATION (JOIST MOUNTING- ) CONTINUED
8. Finish ceiling work. Ceiling hole should be aligned
with the edge of the flange. (Fig.6)
9. Insert the plug connector and plug connector
into the receptacle and receptacle respectively,
and secure the lighting unit to the fan unit with 2
screw (ST4.2X16) and 1 machine screw (M4X8).
(Fig.6)
10. Insert the fluorescent lamp and screw the night
lamp into the lighting unit. (Fig.6)
11. Insert mounting springs into slots as shown
and mount grille to fan body. (Fig.7)
INSTALLATION (JOIST MOUNTING- )
2. Insert the suspension bracket into the adaptor and
secure it to joists by using long screws (ST4.2X20).
(Fig.8)
Ensure that distance B (7/8 inch, 21.6mm) for the
thickness of ceiling board.
1. Disconnect plug connector from receptacle and
remove adaptor from fan body before starting
installation.
3. Follow step 5 to 7 of the installation (page 7) to
complete the duct work and wiring.
If spacing A between joists is 21 1/4 to 23 1/ 2
inches, (540mm~597mm), connect suspension
bracket and (C4 mark to C4 mark) according
to page 6. Select the suspension bracket according
to spacing A as shown below.
Spacing A
between Joists
inches (mm)
suspension
bracket suspension
bracket suspension
bracket suspension
bracket
&
21 1/ 4~23 1/ 2
(540~597)
13 1/4~15 1/ 2
(336~394)
16 1/ 2~18 3/ 4
(419~480)
Ceiling
Plug connector
Plug connector
Plug connector
Plug connector
Receptacle
Receptacle
Mounting spring Lighting unit
Slot
Ceiling
Grille
)
10 7
/8 (2
75
10
7/
27
5
8 (
)
Lighting unit
Screw
(ST4.2X16)
Machine screw
(M4X8)
Fluorescent lamp
Unit: inches (mm)
4 W Night Lamp
Fig. 6
Fig. 7
Adaptor
2 Long screws
(ST4.2X20)
Joists
2 Long screws
(ST4.2X20)
Suspension bracket
Adaptor
Unit: inches (mm)
7/8 (21.6)
B Fig. 8
8