ATEN CS-228 - Manual (Page 23)

Appendix
Master View - Computer Connection Tables
Master Views Type Computers
1 CS-228 1 - 8
2 CS-128A / CS-138A / CS-9138 8 - 15
3 CS-128A / CS-138A / CS-9138 15 - 22
4 CS-128A / CS-138A / CS-9138 22 - 29
5 CS-128A / CS-138A / CS-9138 29 - 36
6 CS-128A / CS-138A / CS-9138 36 - 43
7 CS-128A / CS-138A / CS-9138 43 - 50
8 CS-128A / CS-138A / CS-9138 50 - 57
9 CS-128A / CS-138A / CS-9138 57 - 64
Master Views Type Computers
1 CS-228 1 - 8
2 CS-124A 8 - 11
3 CS-124A 11- 14
4 CS-124A 14 - 17
5 CS-124A 17 - 20
6 CS-124A 20 - 23
7 CS-124A 23 - 26
8 CS-124A 26 - 29
9 CS-124A 29 - 32
Troubleshooting
Symptom Possible Cause Action
Keyboard
and/or Mouse
not responding. The connection from the
selected port to the target
computer has been
broken, or the computer
is turned OFF. Check the Online LED for the selected port. If it is not
lit:
1. Check to see that the computer is powered ON.
2. Check the cables to make sure they are all
properly connected.
Keyboard/Mouse need to
be reset. 1. Unplug the keyboard and/or Mouse connector from
the Console Keyboard and/or Mouse Ports, then
plug it/them back in.
2. Use a thin object (such as the end of a paper clip,
or a ballpoint pen), to press the K/M Reset Switch
(located on the front panel), in.
2001-02-01
CS-228 User Manual 19