2 symbol subwoofer – Avalon Acoustics AVALON SYMBOL Subwoofer And Center Channel User Manual
Page 4

4
2 Symbol Subwoofer
Introduction
Your Avalon MultiChannel Systems loudspeakers were shipped in heavily padded 
cardboard containers to ensure their safe arrival. It is recommended to save these 
containers for possible future use. 
 
At least two people are required to lift the Subwoofer from the shipping container. The 
carton may also be placed on its side and the Subwoofer slid out on its back so as not to 
put pressure on the grille assembly. 
 
Positioning
The Symbol Subwoofer was designed to be placed beneath a projection screen (with 
Center Channel attached). The cabinet may however be placed at the center rear or 
sides of the room, depending on room limitations. It is inadvisable to place the 
Subwoofer in the corners of a room unless the surround sound processor has 
sophisticated filter topologies capable of compensating for the inherent room loading 
problems associated with corner placement. 
 
Connections
AC INPUT: The input voltage has been factory preset for the Country of destination. 
Connect a standard IEC power cord (not supplied for International use due to varying 
plug configurations). Current transfer is essential for tight control of the drivers; it is 
advisable that an AC connection commensurate with a high-powered amplifier be 
used. 
