Avital 3300 User Manual

Page 17

2000 Directed Electronics, Inc.

If your remote transmitter is lost or damaged, you can manually

disarm your vehicle security system. To disarm the system without

a transmitter, you must have the vehicle's ignition key and know

where the Valet

switch is located. Be sure to check with your

installer at the time of installation for both the location and the

preset response (1-5 presses) of the Valet

switch.

To disarm the security system,

turn the ignition key on and

press the Valet

switch the

preset number of times within

15 seconds. If the system does

not disarm, you may have

waited too long; turn the igni-

tion off and repeat the process.

IMPORTANT! The Valet

switch can be programmed to respond to 1-5

presses for the disarm function. You must check with the installer to ver-
ify the programming for your individual unit.

LOCATION OF VALET

SWITCH_____________________________

Use the Silent Mode to temporarily turn off the arm or disarm con-

firmation chirps by briefly pressing

before either arming or dis-

arming the security system. The confirmation chirp(s) will then be

eliminated for that one operation only. To permanently turn off the

arm and disarm confirmation chirps, contact your installation dealer.

Silent Mode

DRW-35

Disarming Without a Transmitter