Sony STR-DN1030 - Manual (Page 106)

106 US
D:\NORM'S JOB\SONY HA\SO130039\STR-DN1030_PMRF
06\4420297142_US\US05ENJ_STR-DN1030-CEL.fm masterpage: Left
STR-DN1030
4-420-297-14(2)
a) You can select this setting only when you have performed the Auto Calibration and saved the settings.
b) Depends on the speaker pattern setting, some parameters or settings may not be available.
c) xxx represent a speaker channel (FL, FR, CNT, SL, SR, SB, SBL, SBR, LH, RH, SW).
d)
You can only select this parameter if “SP PATTERN” is not set to a setting with surround back or front high
speakers (page 38).
e)
You can only adjust the distance in 0.01 meter interval when you have performed the Auto Calibration and
saved the measurement result.
f)
“FEET” for USA and Canada models.
g)
You can only select this parameter if your speaker is set to “SMALL”.
h)
You can only select this parameter if you select “HD-D.C.S.” as sound field.
i)
You can only select this parameter when a Bluetooth device is paired.
Surround settings
[]
Effect level h)
[EFFECT]
DYNAMIC, THEATER, STUDIO THEATER
EQ settings
[]
Front speakers bass level
[BASS]
BASS –10 dB to BASS +10 dB
(1 dB interval)
BASS 0 dB
Front speakers treble level
[TREBLE]
TREBLE –10 dB to TREBLE +10 dB
(1 dB interval)
TREBLE 0 dB
Tuner settings
[]
FM station receiving mode
[FM MODE]
STEREO, MONO STEREO
Naming preset stations
[NAME IN]
For details, see “Naming preset
stations (Name Input)” (page 60).
Audio settings
[]
Digital Legato Linear
[D.L.L.]
D.L.L. AUTO2, D.L.L. AUTO1,
D.L.L. OFF
D.L.L. AUTO1
Synchronizes audio with video
output
[A/V SYNC]
0 ms to 300 ms (10 ms interval),
HDMI AUTO 0 ms
Digital broadcast language
selection
[DUAL MONO]
MAIN/SUB, MAIN, SUB MAIN
Digital audio input assignment
[A. ASSIGN]
For details, see “Using other video/
audio input jacks (Input Assign)”
(page 88).
Video settings
[]
Video input assignment
[V. ASSIGN]
For details, see “Using other video/
audio input jacks (Input Assign)”
(page 88).
HDMI settings
[]
Control for HDMI
[CTRL: HDMI]
CTRL ON, CTRL OFF CTRL ON
Pass Through
[PASS THRU]
ON, AUTO, OFF OFF
Audio out
[AUDIO OUT]
AMP, TV+AMP AMP
Bluetooth settings
[]
Bluetooth standby mode i)
[BT STANDBY]
STBY ON, STBY OFF STBY OFF
System settings
[]
Auto standby mode
[AUTO STBY]
STBY ON, STBY OFF STBY ON
Naming inputs
[NAME IN]
For details, see “Naming the input
(Name Input)” (page 51).
Menu
[Display]
Parameters
[Display]
Settings Default
setting