Sony FWD-50PX2 - Manual (Page 60)

10
(GB)
Location and Function of Parts and Controls
Optional adaptors (Not supplied)
The connectors marked with 7 and 8 on the
connector panel are slot-in type and can be fitted with
any of the optional adaptors described below.
For details on installation, consult your Sony dealers.
Video/S-Video Input/Output Adaptor BKM-
FW10
Same as pre-installed 6.
COMPONENT/RGB Input Adaptor BKM-FW11
1 Y/G P
B
/C
B
/B P
R
/C
R
/R IN (BNC) : Connects to the
analog RGB signal or component (YUV) signal
output of a piece of video equipment or a
computer.
2 HD VD IN (BNC) : Connects to the
synchronization signal output of a computer.
3 AUDIO (Stereo minijack) : Inputs an audio
signal. Connects to the audio output of a piece of
video equipment or a computer.
7 OPTION1 (VIDEO/COM) slot
This slot supports video signals and the
communication function. The slot accepts optional
adaptors for video signal input/output (such as BKM-
FW10, BKM-FW11, BKM-FW12) as well as optional
adaptors with network management capability (such
as BKM-FW32, BKM-FW50). These adaptors allow
you to control the display unit via the network.
8 OPTION2 (VIDEO) slot
This slot supports video signals. A blank panel is
attached to this slot when shipped from the factory.
The slot accepts optional adaptors for video signal
input/output. For optional adaptors with network
management capability, use the OPTION1 slot 7.
A
UDIO
VD
HD
P
R
/C
R
/R
P
B
/C
B
/B
Y/G
COMPONENT/RGB INPUT AD
APT
OR
1
2
3