Sony PCV-RZ32G - Manual (Page 36)

To set up additional equipment
This section illustrates how to set up additional equipment with the Giga Pocket Personal Video Recorder System.
Connecting a VCR or camcorder with an audio cable
Your VAIO ® computer has both audio and video connection capability. You can locate the connections behind the bottom
panel on the front of the system unit. You can connect a VCR or camcorder, using the audio jacks and video ports.
1. Connect a dual audio cable (optional) to the L and R audio jacks, located on the either the front or rear panels of
your computer.
2. Connect the other ends of the dual audio cable to your VCR or camcorder.
Connecting equipment with an S-video or video cable
Your VCR or camcorder may have either standard video or S-video connection capability.
Option 1
1. Connect an S-video cable (optional) directly into the S-video jack on either the front or back panel of your
computer.
2. Connect the other end of the S-video cable into the appropriate port on your compatible VCR or camcorder.
3. Connect an audio cable with double RCA plugs at each end (optional) into the composite audio L and R jacks.
Option 2
1. Connect a stereo A/V dubbing cable with triple RCA plugs at each end (optional) directly into the composite video
port, composite audio L and R jacks, located on either the front or back panel of your computer.
2. Connect the other ends of the stereo A/V dubbing cable into the appropriate jacks on your compatible VCR or
camcorder.
To connect a VCR or cam corder (Option 1)
Connecting the infrared receiver
1. Connect the infrared receiver cable to a USB port located on either the front or back panel of your computer.
Place the infrared receiver unit in a position that enables it to communicate with your remote control.
The infrared receiver must be visible in a line-of-sight with your remote control in order to function properly.
Page 36