Anritsu ML2430A - Manual (Page 226)

A-4 ML2430A OM
SYSTEM SPECIFICATIONS APPENDIX A
Cal Factor Volt-
age
Input
(BNC): Operating Modes:
Voltage: Display voltage reading on selected channel.
Voltage proportional to frequency for sensor calibration
factor compensation.
Blanking Input: TTL levels only. Selectable positive or
negative polarity.
Input Range: 0
to 20V
Resolution: 0.5 mV
Control: Adjustable voltage to frequency relationship
Analog
Output (BNC):
Two outputs configurable to Log or Lin
Operating
Modes: Analog Out: Selectable channel adjusted for calibration
factors and other power reading correction settings.
Pass/Fail: Selectable TTL High or Low
Channel output: Near real time analog. Uncalibrated.
AC Modulation Output: Output 1 only.
Output Range:
–5.0 to 5.0V
Resolution: 0.1 mV
Trigger Input:
Operating
Modes:
External TTL or RF Blanking.
GPIB Interface: IEEE-488.2 and IEC-625. Implements AH1, SH1, T6,
LE0, SR1, RL1, PP0, DC1, DT1, C0 and E1.
RS232: Supports software download and GPIB commands.
Parallel Printer
Output: Compatible with HP Deskjet 540 and 310 Models other
500 Series and 300 Series and later are typically com-
patible. Also
C anon BJC 80. See printer manual for DIP switch
settings.
General Specifications
General: MIL-T28800E, Type 3, class 5, Style E