Sony CDP-CX335 - Manual (Page 16)

16
Playing CDs
Locating a Specific Track or a
Point in a Track
You can quickly locate any track while playing a disc
by using the ≠ AMS ± (AMS: Automatic Music
Sensor) dial or by using the =/+ buttons on the
remote. You can also locate a specific point in a track
while playing a disc.
Number
buttons
=/+
0/)
To locate
the next or
succeeding tracks
the current or
preceding tracks
a specific track
directly Z
a point in a track
while monitoring the
sound Z
a point in a track
quickly by observing
the display Z
You need to
Turn the ≠ AMS ± dial
clockwise until you find the track
Turn the ≠ AMS ± dial
counterclockwise until you find the
track
Press the number button of the track
on the remote. When you directly
locate a track numbered over 10, press
>10 first, then the corresponding
number buttons.
Press 0 (backward)/) (forward)
on the remote and hold down until
you find the point
Press 0 (backward)/) (forward)
on the remote and hold down until
you find the point during pause. You
will not hear the sound during the
operation.
>10
Note
If “– OVER –” appears in the display, the disc has reached the
end while you were pressing ). Turn the ≠ AMS ±
dial counterclockwise or press 0 to go back.
≠ AMS ±
I / u
+100