Sony VGP-XL1B2 - Manual (Page 44)

38 VGP-XL1B User Guide
• Make sure the host computer is running MCE 2005. (Start
MCE, select Settings > General > About Media Center > Soft-
ware Version. Verify the software version is Microsoft
® Win-
dows ® XP Media Center Edition 2005.
• Verify with the computer’s manufacturer that your system sup-
ports Windows MCE Update Rollup 2.
Event:
The Changer can no longer be accessed in Windows.
Comment:
• Make sure that the Changer power cord is properly plugged
into the back panel of the Changer and properly inserted into an
electrical wall outlet.
• Make sure that the 1394 cable is securely inserted to the host
computer and the Changer.
• Make sure the Changer is powered on when starting the host
computer.
• If possible, do not connect other i.LINK ® 1394 devices while
your system is running.
• Restart the host computer and try again.
Note : MCE and your computer may not be completely compatible
with Suspend and Hibernate when using 1394 devices such as
the Sony ® Changer/Recorder. It is recommended to avoid letting
your system go to Suspend or Hibernate. Go to the Power
Management settings and do the following:
• Open the Control Panel, select Performance and Maintenance,
and then Power Options. Change System Standby and
System Hibernates to “ Never ” and click OK to save these
settings.
Kansas2.book Page 38 Wednesday, February 1, 2006 8:00 AM