Changing the display – Sony HT-6600DP User Manual
Page 23
![background image](/manuals/442802/23/background.png)
Basic Operations
23
US
HT-6600DP 4-244-560-11(1) US
PHONES
Use to connect headphones.
• When the headphones are connected, speaker
output is automatically canceled and “SP A”
and “SP B” do not light up in the display.
SPEAKERS (OFF/A/B/A+B)
Press SPEAKERS (OFF/A/B/A+B) to output
the sound from the speakers connected to the
SPEAKERS FRONT terminals.
Each time you press the button, the display will
light up cyclically as follows:
SP A
t SP B t SP A and SP B t
No display*
To drive
Select
Speaker System A
SP A (default setting)
(Connected to the
SPEAKERS FRONT A
terminals)
Speaker System B
SP B
(Connected to the
SPEAKERS FRONT B
terminals)
Both Speaker System A
SP A and SP B
and B (Connected to the
SPEAKERS FRONT A
and B terminals)
* If you do not want to drive Speaker System A
and B, press SPEAKERS (OFF/A/B/A+B) until
“SP A” and “SP B” do not light up in the display
(no display).
Changing the display
DIMMER
Press DIMMER repeatedly to adjust the
brightness of the display (3 steps).
However, when you press any button, the
display becomes the brightest setting
temporary.
DISPLAY
Each time you press DISPLAY, the display
changes cyclically as follows:
Index name of the component*
t Selected
component
t Sound field applied to the
program source
When the tuner is selected
Index name of the preset station*
t
Frequency
t Sound field applied to the band
or the preset station
* Index name appears only when you have assigned
one to the component or preset station (page 33).
Index name does not appear when only blank
spaces have been entered, or it is the same as the
input selector.