AmbiCom WL250N-USB - Manual (Page 24)

Here are descriptions of every setup item:
Item Name
Description
Access Policy Select the policy type of your access rule. Disable: Allow any wireless client with proper
authentication settings to connect to this access point. Allow All: Only allow wireless
clients with MAC address listed here to connect to this access point. Reject All: Reject
wireless clients with MAC address listed here to be connected to this access point.
MAC address Input the MAC address of the wireless client you wish to allow or reject here. No colon
(:) or hyphen (-) required.
Add Add the MAC address you inputted in ‘MAC address’ field to the list.
Delete Please select a MAC address from the list, then click ‘Delete’ button to remove it.
Remove All Delete all MAC addresses in the list.
When you finish with setting and want to save changes, click ‘Apply’ button.
3-4 Connection Table
If you want to see the list of all wireless clients connected to this access point, please select ‘Mac Table’ tab
from the utility.
Here are descriptions of every field:
Item Name
Description
MAC Address Displays the MAC address of this wireless client.
AID The serial number of this wireless connection.
Power Saving
Mode Displays the capability of power-saving function of this wireless client.
Status Displays additional information of this wireless Connection, like current wireless
operating mode and data transfer rate.