Using in wired communication – Sony HMZ-T3W User Manual
Page 18
18
– When the processor unit or battery unit
is installed in a rack with a door or in a
metal rack
– When the processor unit and the
battery unit are installed in the same
rack
• In the following cases, the condition of
wireless communication is temporarily
degraded owing to a change in the
environment, causing disturbance in
video and audio or affecting operations
of the system.
– If the panel with the SONY logo of the
processor unit or the battery unit is
blocked by a human body or some
object
– If a person, animal, or object (e.g.
curtain, door, or partition) in the room
moves
• If video and audio are disturbed, check
the locations and directions of the
processor unit and battery unit.
• Wireless communication is enabled only
between the processor unit and battery
unit purchased in combination.
• Only two sets of units, including this
system, can be used in the same single
room.
Connect the processor unit and the
battery unit, using an HDMI cable.
*
Use a High-Speed HDMI cable sold
separately.
Using in Wired
Communication
Processor unit (Front)
Battery unit
HDMI cable*
HDMI IN/
MHL