Sony DCR-VX2000 - Manual (Page 38)

38
Using the fader function
(1) When fading in [a]
In standby mode, press FADER until the desired fader indicator flashes.
When fading out [b]
In recording mode, press FADER until the desired fader indicator flashes.
The indicator changes as follows:
FADER
t MONOTONE t OVERLAP tWIPE tDOTt no indicator
The last selected fader mode is indicated first.
(2) Press START/STOP. After the fade in/out is carried out, your camcorder
automatically returns to the normal mode.
To cancel the fader function
Press FADER until the indicator disappears.
Note
You cannot use the following functions while using the fader function, and vice versa:
– Digital effect
– Low lux mode of PROGRAM AE (Only in OVERLAP, WIPE, or DOT mode)
– Tape Photo recording
– Interval recording
– Cut recording
When the OVERLAP, WIPE, or DOT indicator appears
Your camcorder automatically stores the image recorded on a tape. As the image is
being stored, the fader indicator flashes fast, and the playback picture appears.
1
FADER
FADER
POWER
OFF
(CHG)
CAMERA
MEMORY
VCR
2