American Audio CK 1000Mp3 User Manual

Page 16

American Audio

- www.AmericanAudio.us - CK 1000Mp3 Instruction Manual Page 16

GENERAL FUNCTIONS AND CONTROLS (Cont.) CD PLAYER LCD

D. LCD DISPLAY PANEL (FIGURE 6)

47. PLAY/PAUSE INDICATOR -

Either the play or

pause indicator will glow depending which mode
you are in.

48. CUE INDICATOR -

This indicator will glow

when the unit is in CUE mode and will flash every
time a new CUE POINT is set.

49. SINGLE INDICATOR -

This indicates that the

CD drive is in single play mode, the track will
play once and return to CUE mode. If the single
indicator is not on the unit is in continuous mode.
In continuous mode the drive will play all the
remaining tracks on the disc until you stop play
or power is interrupted.

50. mP3 INDICATOR -

This will indicate that a Mp3

disc is loaded in the drive.

51. TImE BAR INDICATOR -

This bar gives a

visual approximation of a track's or disc's time
This bar will begin to flash when a track is end-
ing. The flashing bar is great reminder, that time
is running out to get that next track ready to go.

52. LOOP -

This icon will flash when you are in

loop mode. This icon will glow when a loop has
been created but is not actively playing.

53. RELOOP INDICATOR -

Appears when LOOP

is engaged or ready to be engaged.

54. PITCH INDICATOR -

Indicator will light up

when the Pitch is activated.

55. PITCH/BPm mETER -

This meter will dis-

play the pitch percentage applied by the

pItcH

SlIdEr (5).

56. CHARACTER DISPLAY

This will display the

name of the track and album when a Mp3 disc is
loaded.

57. TImE mETERS -

These indicators will detail

the current Minutes, Seconds, and Frames. The
meter will display either the elapse, total, or
remaining time of a track or the entire disc.
The display time will depend on the selected
time function. The selected time function will
be displayed above the TIME METER as either
rEmaInIng track tImE or ElapSEd track
namE.

58. TOTAL/REmAIN INDICATOR -

When TOTAL

is indicated in the lcd dISplay (21) the time
described in the

lcd (21) will define the total disc

remaining time. When REMAIN is indicated in the
lcd dISplay (21) the time described in the lcd
will define the current track's remaining time.

59. AUTO BPm -

This will indicate that the AUTO

BPM counter is active. Press and hold the tap/
Bpm Button (18) for 1 sec. to turn the Auto BPM
function on and off.

60. AUTO CUE -

This will indicate if the Auto Cue

is on or off. Press and hold the Sgl/ctn (3) for 1
sec. to turn the Auto Cue function on and off.

61.FOLDER/TRACK INDICATOR -

This indicator

shows you if you are looking at the track number
or the folder number..

62. TRACK/FOLDER DISPLAY -

This indicator

describes which track or folder is currently cued
or is playing.

Figure 6