Kantech KT-400 - Manual (Page 7)

DN1726-0811 3
KT-400 Ethernet Four-Door Controller Installation Manual
Compliance Specifications
FCC & IC Compliance
This device complies with Part 15 of the FCC rules Class A. Operation is subject to the following two conditions: (1) this
device may not cause harmful interference, and (2) this device must accept any interference received including
interference that may cause undesired operation. This class A digital apparatus meets all requirements of the Canadian
Interference Causing Equipment Regulations. The KT-400 Ethernet Four-Door Controller is also compliant with
EN55022:1998, amendment 1:1995, Class A.
UL Compliance
To comply with UL listings, the following requirements must be met:
• Use of a UL listed computer
• Use of UL listed readers (Wiegand 26 and 34 bits, mag stripe 26 and 34 bits, XSF 39 bits have been tested and found to
comply)
• Use of a UL recognized tamper switch on every housing cabinet for the KT-400 Ethernet Four-Door Controller
• Do not use the SmartLink option
• Do not use a 240 VAC transformer (not UL listed)
• Use only UL listed cables
• Use only UL listed adaptors
• Use only a UL listed transformer Hammond BF2F such as Kantech part number TR1675 (Available through Kantech
distributors or dealers, please refer to the Technical Support contact information on page 2 to obtain the specific
transformer)
Note: All circuits are power limited.
UL 294 Compliance Notice
• IP Connectivity: Only for supplementary use when planning to install the KT-400 Ethernet Four-Door Controller with a
UL 294 access control system.
• Use only UL 294 or UL 1076 listed power supply
• Connect Kantech part number KT-ACPW-LED status indicator to the 16 VAC black terminals of the KT-400
• Use Kantech part number KT-BATT-12 battery, see Note.
Note: Backup battery provides operation of up to 12 hours but has been tested for 4 hours per Section 33 of UL 294,
fifth edition.
UL 1076 Compliance Notice
• The KT-400 is UL 1076 Listed as a Commercial Proprietary Control Unit Accessory and Proprietary Burglar Alarm
Unit (Section 83.2), with EntraPass and Redundant Server, alarm system features, KT-300 Controllers, ioProx
Proximity readers, and TRex request to exit devices – other sensor devices (temperature, water level, etc.) may
be used as long as they are also UL 1076 Listed.
• The EntraPass and Redundant Server shall be running at all time, and manned 24 hours a day, 365 days a year
– The EntraPass and Redundant Server will each have their own operator workstation.
• Data processing equipment and office appliance and business equipment used as central supervisory equipment
station shall be listed to Information Technology Equipment - UL 60950.
• Should the EntraPass and/or Redundant Server be replaced, a UL 60950 listed computer must be used.
• The following recommended system requirements apply to the EntraPass Server, Redundant Server, Video Vault,
Card Gateway, SmartLink, and Workstation:
• Operating Systems: Windows® 2000/XP/2003 Standard and Enterprise Server Editions/Vista
• Processor: Pentium IV at 1.8 GHz