Sony HVL-MT24AM - Manual (Page 46)

HVL-MT24AM_GB 2-889-493-01 (1)
4
While holding the diffuser by its panel’s top tab, press it
against the face of the twin flash unit.
Press the diffuser until it clicks into place.

Notes on using the diffuser
 If the arm is set at the 60° position and used with a wide angle lens, the diffuser
may appear in the image. It is recommended that you always use the diffuser
with the arm set at the 90° position.
 The flash output is reduced when using the diffuser. See page 28 for TTL flash
metering, or page 38 for manual flash metering.