Aico Ei261DENRC - Manual (Page 32)

Alternatively, if an optional Ei1529RC Remote Control is fitted, pressing the LOCATE switch when all
alarms are sounding will silence all alarms apart from the alarm that is sensing CO/Smoke/Heat.
This area can then be safely investigated and if determined that it is a false alarm, press the HUSH switch
to silence the alarm.
14. ACCESSORIES
32
Ei1529RC Remote Control
The Ei1529RC is strongly advised for systems with interconnected CO and
Smoke/Heat Alarms.
It allows the user to perform the following functions from a remote location.
Ei128RBU Relay Module with Ei128COV Cover
The Ei128RBU module has a relay rated at 230VAC / 5Amps. It is mains
powered with rechargeable battery back-up. It can be used for remote
signalling and activating gas shut-off valves, strobes etc.
Locate - When system sounds press Locate to allow the source of
alarm to be identified
Hush - Press Hush to silence nuisance alarms
Test - Operate weekly to Test the alarm system
Mains
Check - Test will not work with mains absent
B16132-R0-261ENRC-UC-ENG 7/11/07 11:52 AM Page 32