Karcher IC 15-240 W Adv - Manual (Page 16)

- 3
1 Drawbar
2 Storage compartment
3 Kerb access help (option) *
4 Cover
5 Waste container
6 Suction head
7 Handle for filter cleaner (optional; fine
dust filter attachment set) *
8 Brake spring
9 Freewheel lever
10 Battery
11 Fuel tank
12 Tank lid
13 Fuel tap
14 Coarse filter (optional, fine dust filter at-
tachment set) *
15 Beacon light (optional) *
16 Blower pipe (optional, leaf blower at-
tachment set)
17 Suction tube
18 Handle
19 Bulk waste flap
20 Suction hose
21 Exhaust openings for vacuuming
22 Tool holder (for brooms, shovel,...)
23 Hood support
24 Storage compartment for 5 -litre re-
serve can (LxBxH: 165x147x247 mm)
25 Unlock/ Brake
26 Gas lever
27 Ignition lock
28 Fuse of electric starter, 15 A (on the
rear)
29 Handle for device hood
30 Choke
31 Operating hour counter
* Included in the scope of delivery with
1.183-904.0
ƽ
Danger
Risk of injury and damage! Do not use a
forklift to unload the appliance.
To unload the machine, proceed as follows:

Cut plastic packing belt and remove foil.
 Remove the elastic tape fasteners at
the stop points.
 Remove the front wheel lock.
 Freewheel lever for moving the appli-
ance without adjusting self-drive (see
below).
 Drive the device forward from the pal-
ette.
 Tilt the suction head upward.
 Close the waste container lid.
 Pull the waste container backwards out
of the device.
 Fill battery with battery acid (see sec-
tion on Care and Maintenance).
 Connect the black earthing cable to the
battery and tighten the clamp screw.
 Insert the waste container into the appli-
ance.
 Open the waste container lid.
 Tilt down the suction head.
 Freewheel lever for moving the appli-
ance without adjusting self-drive (see
below).
The machine can be moved in 2 ways:
(1) By pushing it (see device without en-
gaging self-propulsion).
(2) By driving it (see device by engaging
self-propulsion).
ƽ
Danger
Risk of injury! Before engaging the free-
wheel operation, the machine must be se-
cured to prevent it rolling away.

Open the device hood and secure it us-
ing the hood support.
Operating and Functional Elements
Before Startup
Unloading
Device without engaging self-
propulsion
16 EN