Aastra Telecom REV 06 - Manual (Page 25)

Features in Release 2.2
RN-001029-00, Rev 06, Release 2.2 21
5i Series IP Phone Release Notes
Configuring CFWD Using the Configuration Files
You use the following parameters to set CFWD on the IP Phone using the
configuration files:
• call forward key mode
• softkeyN type, topsoftkeyN type, prgkeyN type, or expmodX keyN type
• softkeyN states (optional)
Notes:
1. If there is no CFWD key configured on the phone or it is
removed, you can still set the CFWD modes via the IP Phone UI at the
path Options->Call Forward.
2. If there is only one account configured on the phone, then the
mode setting is ignored and the phone behaves as if the mode was set
to “Phone”.
3. When configuring a CFWD mode (All, Busy, No Answer) for
an account, you must configure a CFWD number for that mode in
order for the mode to be enabled.