Allied Telesis SWITCH AND SWITCHBLADE XEM-2XP - Manual (Page 16)

Installation Guide
15
XEM-STK Stacking Ports
The XEM-STK dual-port stacking expansion module features:
■ two 15 Gbps full duplex stacking connections
■ LEDs showing port and stack member status
■ seven-segment stack ID display
■ recessed Select button to reset stack ID to 1
Front view XEM-STK
The following LEDs report operations and faults on the XEM-STK.
LED State Description
Port 1
Port 2
Green A link has been established.
Amber slow flashing The link has a transmission fault.
Status
Green The switch is the stack master.
Amber The switch is a stack member.
Green flashing The switch is in the process of learning
the stack topology and selecting the
stack master.
Off The switch is not a stack member.
ID
1 to 8 Numeric ID of the stack member.
Off The switch is not a stack member.
PORT 2 PORT 1 STACK
SELECT STATUS
ID
XEM-STK
FAULT NEGOTIATING LINK PORT STAT MEMBER MASTER
XEM_IG.fm Page 15 Monday, July 19, 2010 10:40 AM