NewAir ACP-1400E - Manual (Page 15)

15
TROUBLE TROUBLE TROUBLE
TROUBLE
SHO SHO SHO
SHO
O O O
O
TING TING TING
TING
Never try to repair or dismantle the air condition yourself. Incompetent repairs
result in loss of warranty and can endanger the user and the property.
Problem Problem Problem
Problem
Cause Cause Cause
Cause
Solution Solution Solution
Solution
The air
conditioner
does not
function.
No power supply.
Connect to a functioning outlet and switch
on.
Timer function is active. Deactivate TIMER function.
The air
conditioner does
not seem to
perform.
In direct sunlight. Close curtains.
Windows or doors open, many
people or a heat source in the
room.
Close doors and windows, place an extra air
conditioner.
Dirty filter. Clean or replace the filter.
Air inlet or air outlet blocked. Remove the blockage.
Room temperature lower than the
selected value.
Change temperature selection.
The unit is noisy. Unit stands uneven. Place on an even, solid surface.
The compressor
does not work.
The overheat protection is
probably active.
Wait 3 minutes until the temperature has
decreased, then turn on the unit again.
To correct problems that were not been described in this table and / or if the recommended
solutions fail to solve the problem, contact an authorized service centre.