Samsung LNR377DX-XAA - Manual (Page 71)

English- 65
P C D I S P L AY
Adjusting the Screen Quality
T he purpose of the picture quality adjustment is to remove or reduce picture noise.
If the noise is not removed by fine tuning alone, then do the frequency adjustments to
the utmost and fine tune again. After the noise has been reduced, re-adjust the picture
so that it is aligned on the center of screen.
1
Press the MENU button
to display the menu.
Press the UP/DOWN
buttons to select “Setup”,
then press the ENTER
button.
Press the UP/DOWN
buttons to select
“PC” then press the
ENTER
button.
2
Press the ENTER
button to select
“Image Lock”.
3
Press the UP/DOWN
buttons to select
“Coarse” or “Fine”,
then press the
ENTER
button.
Press the
LEFT/RIGHT
buttons to adjust the
screen quality. Vertical
stripes may appear or
the picture may be blurry.
Press the ENTER button.
Press the EXIT button to
exit.
Change to the PC mode first.
01 BN68-00929A-00Eng.qxd 6/8/05 8:25 AM Page 65