Samsung DVD-V1000V-XAA - Manual (Page 33)

GB
65
Direct Time Search
Use Direct Time Search to locate a specific tape location in hours,
minutes, and seconds. This is useful for editing purposes, i.e. you
can advance the tape directly to the beginning of the desired scene.
1 Open “SEARCH MENU”
From Stop or Play mode, press the SEARCH button.
2 Select “Direct Time Search”
Using the up/down, move the selection arrow to “Direct Time
Search,” then push right to select.
3 Select +/– Counter Value
Press 1 for positive or 2 for negative counter values.
4 Enter the Time
Use the number buttons (0–9) to enter the desired time in hours,
minutes, and seconds. Press Clear if you need to backup and re-
enter a number.
5 Start the Search
Press the SEARCH button to advance the tape to the specified
time.
GB
64
Index Search
Index Search will fast-forward or rewind a specified number of
Index Marks from 1 to 99. When it reaches the desired Index Mark,
it will play the tape. Use Index Search when you know the exact
Index Mark you want to locate.
1 Open “SEARCH MENU”
From Stop or Play mode, press the SEARCH button.
2 Select “Index Search/Scan”
Using the up/down, move the selection arrow to “Index
Search/Scan,” then push right to select.
3 Enter # of Marks to Search
Enter a number from 1 to 99; e.g. for “5” press “0-5”.
4 Search for Index Marks
Press Fast-Forward or Rewind to begin searching forward or
backward for the specified Index Mark. When the VCR locates the
Index Mark, it will play the tape.
Blank Search
With Blank Search you can easily locate the next available blank
(unused) segment on your videotape.
1 Open “SEARCH MENU”
From Stop or Play mode, press the SEARCH button.
2 Select “Blank Search”
Using the up/down, move the selection arrow to “Blank Search,”
then push right to select.
• The DVD-VCR will automatically search for the next available
blank space on your tape and stop.
• If no blank space is found, the tape will be ejected.
01547A DVD-V1000/XAA-Eng5 5/16/02 3:47 PM Page 64