Samsung XE700T1A-A04US - Manual (Page 35)

35 Using the Slate PC
Using the Slate PC Dock
Ports Provided by the Dock
The back of the Dock
1 2 3 4 5
1
DC Jack A jack to connect the AC adapter that
supplies power to the computer.
2
Wired LAN Port
Connect the Ethernet cable to this port.
3
Digital Video/
Audio Port
(HDMI)
You can connect an HDMI cable to this
port. Using this port, you can enjoy digital
video and audio on the TV.
4 USB Port
You can connect USB devices to the USB
port such as a keyboard/mouse, digital
camera, etc.
5 Headphone Jack A jack used to connect the headphones.
Connecting headphones to the Dock
Using the Headphone jack
1 Right-click over the Volume Control icon in the notification
area at the bottom right of the Desktop and select Playback
Devices . (Alternatively, click the Control Panel > Hardware and
Sound > Sound > Playback tab.)
2 Select the Speakers(USB audio) , click Set Default and click OK .
Using the computer’s built-in speaker when the
computer is installing on the Dock
When the Dock is connected, the audio is output to the headphone
jack of the Dock. To use the computer’s built-in speaker when the
Dock is connected, configure it as follows.
1 Right-click over the Volume Control icon in the notifi cation
area at the bottom right of the Desktop and select Playback
Devices. (Alternatively, click the Control Panel > Hardware and
Sound > Sound > Playback tab.)
2 Select the Speakers (Realtek High Defi nition Audio), click Set
Default and click OK .