Led indicators – Accton Technology Media Converter EC3802-WDM User Manual
Page 16
Description of Hardware
16
LED Indicators
The CPE includes seven LED status indicators on the top panel. The LEDs are
detailed in the following figure and table.
LED
Description
PWR
ON: Power is on.
OFF: Power is off.
OPT
ON: Fiber link is up.
OFF: Fiber link down.
TEST
ON: Loopback test in progress.
OFF: No loopback test (normal mode).
PoE
ON: PoE is enabled on the LAN port.
OFF: PoE is disabled on the LAN port.
Link
ON: UTP port link is up.
Flashing: UTP port is transmitting or receiving data.
OFF: UTP port link is down.
100M
ON: UTP port is operating at 100 Mbps.
OFF: UTP port is operating at 10 Mbps.
FULL
ON: UTP port is operating in full-duplex mode.
OFF: UTP port is operating in half-duplex mode.