Specifications, 6 specifications – ACTiSYS ACT-IR100M User Manual
Page 15
ACTiSYS Corp.
IR Printer Adapter IR100M+/100M/100MP
6 SPECIFICATIONS
Model:
ACT-IR100M+/100M/100MP
Carrier:
Infrared radiation (peak wavelength: 850 to 1050 nm)
IrDA SIR Transmission Speed: 9.6, 19.2, 38.4, 57.6, 115.2K bps
Parity Bit:
None
Data:
8
bit
Stop
Bit:
1
bit
Error Check:
CRC
Parallel Interface:
Centronics 36F/36M Cable to Parallel Printer.
DB 25M/Centronics 36M Cable to PC Parallel Port.
Serial Interface: (IR100M+ only) DB9 Male Connector on IR100MB
DB9 Female
Connector on IR220L+
Power Source: AC 120V 50/60Hz with AC adapter.
(ACT3-128)
7.5V DC, 300mA
(AC adapter for spec. of other countries also available)
Power Consumption:
0.30W During Printing
Operating Temperature: 0
o
C to 40
o
C (32
o
F to 104
o
F)
IR100M+
Dimension:
2.68” (W) x 3.15” (L) x 1” (H)
(68mmW x 80mmL x 25mmH)
Weight:
7.1 oz (201 gr.) (excluding battery or cable)
Cable (IR220L+): 5’11”
(180cm)
IR100M
Dimension:
2.36” (W) x 3.94” (L) x 0.79” (H)
(60mmW x 100mmL x 20mmH)
Weight:
6.6 oz (188 gr.) (not including battery)
IR100MP
Dimension:
2.68” (W) x 3.15” (L) x 1” (H)
(68mmW x 80mmL x 25mmH)
Weight:
oz ( gr.) (no battery is required)
Release 3.2, August 20, 2003
15
© Copyright ACTiSYS Corporation 1999-2003. All Rights Reserved