AMX AXB-VOL3 - Manual (Page 11)

Programming
7 AXB-VOL3 Three-Channel Volume Control
AXB-VOL3 Send_Commands (Cont.)
PP Syntax:
SEND_COMMAND VOL, ’P = P’
Variable:
Channel = Enter channel number.
Examples:
SEND_COMMAND VOL, ’P1 = P2’
Sets channel 1 level to the same as channel 2.
SEND_COMMAND VOL, ’P1 = P3’
Sets channel 1 level to the same as channel 3.
SEND_COMMAND VOL, ’P2 = P1’
Sets channel 2 level to the same as channel 1.
SEND_COMMAND VOL, ’P2 = P3’
Sets channel 2 level to the same as channel 3.
SEND_COMMAND VOL, ’P3 = P1’
Sets channel 3 level to the same as channel 1.
SEND_COMMAND VOL, ’P3 = P2’
Sets channel 3 level to the same as channel 2.
Note: You cannot use 'P0' with these commands.