Led indication, Factory reset, Led indication 8. factory reset – Kinivo BTC455 Bluetooth Hands-Free Car Kit for Cars with Aux Input Jack User Manual
Page 11
Kinivo BTC455 Bluetooth Car Kit with Multipoint
11
7. LED Indication
8. Factory Reset
WARNING: Performing a factory reset on the BTC455 will delete any previous
pairings and will restore the unit to factory default settings. Only perform this if
you are experiencing any issues with the product.
Press and hold the previous and next song buttons simultaneously for 5
to 7 seconds.
The BTC455 will make two audible beeps and the LED will blink twice.
The next time the BTC455 is powered on, it will automatically enter pairing
mode.
Status
LED Indicator
Powered off
Off
Powered on
Blinking blue
Pairing mode
Alternating blinking blue and red
Standby mode
Slow blinking blue