iPazzPort KP-810-19R/19VR - Manual (Page 17)

Troubleshooting
Remote does not operate your product.
1.Press the mode button of the product you want to control.
2. Program the remote with a new code.
3. Install new batteries. (You might have to reprogram your remote
after installing new batteries.)
4. Remote may not be compatible with your product.
Remote does not operate some features of your product.
1.Program remote with a new code.
2.Remote may not be able to operate all features of your product or
button names might be different than your product.
Red Indicator blinks after you program a product code.
1. Remote did not accept the code.
2.Try to program the code again or try a different code.
Limited Lifetime Warranty
The manufacturer warrants that this product shall be free from defects
in material, workmanship and assembly,under normal use, in accordance
with the specifications and warnings, for as long as you own this product.
This warranty extends only to the original purchaser of the product,
and is nontransferable. Defective products,together with the dated
proof of purchase, must be returned to the place of purchase for repair
or replacement.
Activate audio ( optional for KP-810-19VR )
1 Press audio active button to activate audio feature. Pluging your
headset into
headset jack,then you can enjoy music or chat with your
friend through keyboard. Press this button again to cancel audio feature.
Audio Active button
Headset jack
Speaker