Apollo 65 User Manual
Page 102
3. Press
SEL
. The Starting Waypoint field will flash
“INS?” (insert) or “CHG?” (change). Press
ENTER
to start editing the Starting Waypoint selection.
Start: Ins?
Spacing
:1.0
Direction :000·
4. Choose a waypoint using normal selection
methods. Then, press
ENTER
.
5. The Spacing option will flash. Turn the
SMALL
knob to select the desired pattern spacing. You may
select between 0.2 and 9.9 nm.
Start:PFC
arpt
Spacing
:1.0
Direction :000·
6. Turn the
LARGE
knob to the Direction of Travel
option. Turn the
SMALL
knob to select the desired
Direction of Travel. You may select a direction
from 0 to 359.
Start:PFC
arpt
Spacing
:1.5
Direction :000·
7. Press
ENTER
when selections are complete.
8. Note the diamond on the lower, right portion of the
screen. This indicates another available page. Turn
the
SMALL
knob one position to view the next setup
page.
4-24
Moving Map Functions
ENTER
ENTER
ENTER
SEL