Steffy Wood Products 8-Section Rest Mat Storage Unit - Manual

PARTS LIST
DESCRIPTION PART NUMBER QTY
ANTI-TIP HARDWARE 7165 1
HEX KEY 7201 1
CONNECTING BOLT 7213 12
BUMPER 7217 1
1" LONG SCREW 7242 1
PLASTIC DIVIDER 7262 3
TOP PANEL 80073 1
LEFT SIDE 80074L 1
RIGHT SIDE 80074R 1
DIVIDER 80075 1
SHELF 80076 3
BACK PANEL 80077 4
BOTTOM PANEL 80113 1
701 West Mill Street
Angola, Indiana 46703
CAUTION: CHOKING HAZARD
Adult assembly required due to the
presence of small parts and sharp edges.
Questions?
Phone: 1-800-656-8586
Email: [email protected]
Steffy
Wood Products, Inc.
Item #7162
8-Section Mat Storage
1
(refer to sketch below)
Attach the divider to the top and bottom panel
using the connecting bolts and hex key
supplied. Be sure the slots for the back face
each other and the slots in the divider are
facing UP.
TOP PANEL
BOTTOM PANEL
DIVIDER
2
(refer to sketch above)
Attach the rubber bumper to
the bottom panel using the
1" long screw.
3
(refer to sketch at right)
Attach one side panel to the top and bottom panel using
the connecting bolts. Be sure the slots on the side panels
matches the slots in the top and bottom panels. LEFT SIDE
BOTTOM PANEL
DIVIDER
SLOTS BOR BACK
TOP PANEL
SLOTS FOR BACK
SLOTS IN DIVIDER
TOP PANEL
80073
LEFT SIDE
80074L
SHELF
80076
DIVIDER
80075
BOTTOM PANEL
80113
RIGHT SIDE
80074R
HEX KEY
7201
BUMPER
7217
CONNECTING BOLT
7213
1" LONG SCREW
7242
1" LONG SCREW
BUMPER