OZ Lifting Products OZ Builder's Hoist OM - Manual (Page 2)

Introduction
The OZ Builder’s Hoist is designed for commercial building sites, as well as various construction
workplaces, such as warehousing, buildings, storage areas, and factories in general.
Table of Contents
Pg.2 . . . . . . . . . . . . . . . . . . . . . .Introduction / Table of Contents
Pg.3 . . . . . . . . . . . . . . . . . . . . . .Specifications / Initial Warning Instructions
Pg.4 . . . . . . . . . . . . . . . . . . . . . .Environment Precautions / Installation
Pg.5 . . . . . . . . . . . . . . . . . . . . . .Installation / Working Method
Pg.6 . . . . . . . . . . . . . . . . . . . . . .Working Method /Handling Precautions
Pg.7 . . . . . . . . . . . . . . . . . . . . . .Handling Precautions / Operating Precautions
Pg.8 . . . . . . . . . . . . . . . . . . . . . .Periodic Inspection
Pg.9 . . . . . . . . . . . . . . . . . . . . . .Wire Rope Replacement
Pg.10 . . . . . . . . . . . . . . . . . . . . .Braking and Winding Devices
Pg.11 . . . . . . . . . . . . . . . . . . . . .Trouble Shooting
Pg.12 . . . . . . . . . . . . . . . . . . . . .Guarantee / Warnings
Pg.13 . . . . . . . . . . . . . . . . . . . . .Parts List
Pg.14 . . . . . . . . . . . . . . . . . . . . .Parts List
Pg.15 . . . . . . . . . . . . . . . . . . . . .Service Notes
Pg.16 . . . . . . . . . . . . . . . . . . . . .Contact Info
Ensure the Hoist is mounted on a straight bar which only allows the hoist to swing backward and forward and not left to right or swinging
in a 360 degrees. Failure to do this could result in uneven winding of rope onto the drum, rope jamming, and rope damage.
pg.2