beautypg.com

Ener – ASKO D3731 User Manual

Page 10

background image

Page 10

Your ASKO dishwasher has an overfill protection device
that automatically shuts off the inlet valve and circulation
pump and starts the drain pump if the water level in the
unit should rise above the normal level. If this happens,
turn the water off at the main supply and call for service.

O

O

O

O

OVERFILL PR

VERFILL PR

VERFILL PR

VERFILL PR

VERFILL PRO

O

O

O

OTECTION

TECTION

TECTION

TECTION

TECTION

If there is water in the base pan due to an overfill or
small leak, the water must be removed before the
dishwasher will start.

When an overfill is detected, the display window will show
a fault message. (See “Fault Codes” on page 8.)

ENER

ENER

ENER

ENER

ENERGY SA

GY SA

GY SA

GY SA

GY SAVING

VING

VING

VING

VING TIPS

TIPS

TIPS

TIPS

TIPS

♦ If you plan to wash the dishes right away, there’s no

need to pre-rinse. Simply scrape off large particles
and load the dishes.

♦ Wash only full loads.

♦ Use the Heavy Wash or Pots and Pans program

only for heavily soiled dishes.

♦ Don’t use temperatures above 130°F for lightly soiled

dishes.

♦ Use the Express option when washing only slightly

soiled loads.

♦ Use the “Economy” drying option. (You can speed

up the drying process by opening the door slightly to
release the moist air.)

Poor washing performance

♦ The dishes may not be loaded properly. Make sure

that soiled surfaces are facing downward or toward
the center of the dishwasher. Also, make sure that
the bowls, pots, etc., are not stacked so closely that
water can’t reach the soiled surfaces.

♦ Make sure you are using the appropriate program

settings for the dirtiness of your dishes.

♦ Choose a stronger program and/ or a higher

temperature.

♦ An item may be obstructing the spray arm rotation.

With the baskets loaded and in place, manually turn
the spray arms to make sure they move freely.

♦ Your dishwasher detergent should be fresh and stored

tightly closed in a cool, dry place. Old or caked
detergent will not dissolve properly. Wait until you
are ready to start the dishwasher to add the detergent.
If you are using the Delay program, make sure the
dispenser is dry before adding the detergent.

♦ Your dishwasher detergent may be inferior. Try a

different brand.

♦ Make sure the rinse aid dispenser is filled. (See page 6.)

♦ If you have hard water in your area, try adding more

detergent and increasing the amount of rinse aid
dispensed. (See page 4-5.)

♦ Check that the spray arm jets are not clogged.

♦ Do not overload the dishes and be careful to avoid

nesting.

Poor drying performance

♦ Select the Normal drying setting.

♦ If you don’t want to use Normal drying, you can

decrease the drying time by opening the door slightly
to let out the warm, humid air.

♦ Make sure the rinse aid dispenser is filled. (See

page 5.)

♦ Make sure you use the proper amount of rinse aid.

(See page 5.)

SOL

SOL

SOL

SOL

SOLUTIONS

UTIONS

UTIONS

UTIONS

UTIONS T

T

T

T

TO COMMON DISHW

O COMMON DISHW

O COMMON DISHW

O COMMON DISHW

O COMMON DISHWASHING PR

ASHING PR

ASHING PR

ASHING PR

ASHING PROBLEMS

OBLEMS

OBLEMS

OBLEMS

OBLEMS

As with any new appliance, it sometimes takes using it a
few times to learn to operate it properly. If you are having
minor performance problems with your dishwasher, read
this section before calling for service. It may save you
time and unnecessary expense.

NOTE: ASKO has no control over what is put in our
appliances once installed in a customer’s home. You are
solely responsible for what you wash in your ASKO
dishwasher.

♦ Load items with concave bottoms tilted so as much

water as possible will run off.

♦ Unload the bottom basket first to avoid spilling water

onto the dishes when unloading the top basket.

♦ Certain plastics may need to be towel dried.

♦ Load the machine full (1/2 load doesn´t give as good

drying result).

Plastic items

♦ Always check the manufacturer’s suggested care

instructions before washing plastic in your
dishwasher.

♦ Some high-acid foods can discolor plastic. You

should rinse these items if you do not plan to run the
dishwasher right away.

♦ Plastic items dry poorly and may need to be towel

dried.

Chipped or Broken Dishes

♦ When you load the dishes, be sure they’re securely

in place and will not fall over or strike against each
other during the wash.

♦ Load glasses between the tines, not straddling them.

♦ Move the baskets in and out slowly to avoid slamming

the dishes together.

♦ Make sure not to load dishes so high that the spray

arms could strike them.

♦ Make sure tall glasses and stemware will clear the

top of the tub when you push the basket in.

♦ Always load delicate items in the top basket.

♦ Do not overload the dishwasher.

♦ Do not jam the glasses together when loading.

Continued on next page.