Speedtech Lower Control Arm - Manual

1 | P a g e
Nov 25, 2013
Lower Control Arms
Installation Instructions
The following instructions are intended for professional installers
and are guidelines only.
Speedtech Performance assumes NO
responsibility for the installation of any of its products. All products are
intended for off road use only and must be installed by qualified
professionals only
Thank you for purchasing your new Speedtech lower control arms. Installing this product will
require the unbolting and removal of your front suspension. Take all necessary precautions
whenever jacking up your vehicle and use safe and sturdy jack stands to support the vehicle
whenever it is off the ground. Be sure to take all other safety precautions required to do the job
correctly.
Note: These control arms WILL NOT work with drum brakes.