ididit Horn Contact Pin Assembly - Manual

PROPERTY OF
ididi
T, inc
PROPERTY OF
ididi
T, inc
PROPERTY OF
ididi
T, inc
PROPERTY OF
ididi
T, inc
PROPERTY OF
ididi
T, inc
PROPERTY OF
ididi
T, inc
ididit inc. 610 S. Maumee St. 49286 Tecumseh, MI PH: 517-424-0577 FAX: 517-424-7293
www.ididitinc.com
Horn Contact Pin Assembly Installation Instructions
For Part Number 2612000010
Instruction #: 8000010050 REV 01/13
1. Insert spring into the white tube of horn cam.
(Figure 2)
2. Slide black locking sleeve over the contact pin
so that the sleeve sets on the large flat of the pin.
(Figure 3)
3. With the large flat of the pin & holding the
black sleeve, compress spring until the tab on
the black sleeve lines up with the groove on the
horn cam.
(Figure 4)
4. Twist black sleeve to the right and lock into
place. (Figure 5)
5. Once you have twisted locking sleeve into the
groove, your installation of contact pin is now
complete.
(Figure 6)
Kit includes:
1 - Spring (A)
1 - Locking Sleeve (B)
1 - Pin (C)