HUACAM HCV704 User Manual

Page 11

www.huacam.com 11

NOTE:

Please temporarily disable Antivirus or Internet Security Software when download and install

the Huacam Firefox plug-in for video or “HCViewerX.cab” for Microsoft Internet Explorer.

Connect to the Camera using Static IP

If no DHCP server in the network, or the camera does not get IP from DHCP server, user can

connect the camera to a computer directly, using static IP to configure the camera.

The default IP, if no DHCP server; or DHCP offer time out (3 minutes), is 192.168.1.168

1. Connect the computer RJ-45 via an Ethernet cable directly to the IP camera HCV704 .

2. Configure the computer using Static IP: 192.168.1.XXX (1

configure the “Subnet mask” to “255.255.255.0”. Leave the “Default Gateway” to “Blank” like

below:

3. Power on the HCV704 .

4. Start the IE or Firefox browser when the network connection is up.

5. Enter 192.168.1.168 in the address bar of the browser.

6. The browser will ask for plug-in or ActiveX if not installed, otherwise it will get to Home page

and start to show the video captured by the camera (by default the camera enabled anonymous