Actron 9640UB Upgrade - Manual (Page 2)

ENTER
BACK
ON
OFF
ENTER
FUNC
HELP
ENTER
BACK
ON
OFF
ENTER
FUNC
HELP
Installation of
9640UB Software
Install the CAN Adapter Board before
installing software
After 9640UB CAN Adapter Board
installation, 9640UB software must be
installed for tool to work correctly.
IMPORTANT
STEP 1
Remove software serial number and place on CD in
space provided.
STEP 2
Register Software by calling 1-800-228-7667 and receive
an authorization number.
Authorization Number:
A computer is not required for an
authorization number but a computer,
scan tool serial number and software
serial number are required to update
Scan Tool software.
IMPORTANT
STEP 3
Connect serial cable from serial port on computer to
Scan Tool
.
STEP 4
Press ON/OFF button on Scan Tool then press ENTER
when told.
STEP 6
Close all programs on computer and place CD in drive.
STEP 7
Click Start then Run on computer.
STEP 8
Type “X:\setup.exe” in open box on computer
and press OK.
X is the CD-ROM drive letter
on your computer.
IMPORTANT
STEP 9
Follow screen prompts on computer to complete
software download.
If downloading process
stops, repeat STEP 5
through STEP 9.
IMPORTANT
Start
Run
Open box
OK button
0002-000-2516
ON/OFF
button
STEP 5
Place scan tool in Program Mode using the
­
and
¯
arrows
and pressing ENTER.
Program
Mode
ENTER
button
© 2003 Actron Manufacturing Company
All rights reserved.
ENTER
button
UP and
DOWN
arrows
Main Menu
Tool Setup
Tool Self-Test
2 Program Mode
Software Serial Number:
Scan Tool Serial Number: