HP Color LaserJet 9500 Printer series - Manual (Page 24)

http://www.hp.com/support/lj9500
22 Chapter 3 – What you can do Rev. 1.0
Open the printer driver
Note Printer-driver settings override control panel settings. Software application settings override both
printer-driver settings and control panel settings.
Changing the settings for a print job
If you want print settings to be used only in the software application that you are using, change the settings from the
software application. After you quit the software application, the printer settings return to the defaults that are configured in
the printer driver.
To change print settings for a print job
1 In the software application, click the File menu, and then click Print.
2 Click Setup or Properties. (The options might be different for your application.)
3 Change the print settings that you want to change, and then click OK.
• Create the effect of a full-bleed image page 36 Computer
• Print special documents
page 37 Computer
Feature Location of procedure Where to perform the feature