Ameriphone CL-40 - Manual (Page 13)

12
Wall Mounting
You may choose to put the BASE UNIT of your cordless telephone on a wall.
1. With the back of the BASE UNIT facing up, connect the SHORT TELEPHONE LINE
CORD to the telephone line jack.
2. Insert the SHORT TELEPHONE LINE CORD through the hole of the MOUNTING
BRACKET.
3. Insert the upper hooks of the MOUNTING BRACKET into the matching upper slots
of the BASE UNIT. Press down on the opposite side of the MOUNTING BRACKET
until the other hook locks into place.. Plug the free end of the SHORT TELEPHONE
LINE CORD into the MODULAR WALL JACK.
4. Align the upper keyhole on the MOUNTING BRACKET with the upper STUD of the
wall plate, so that the opening end of the MOUNTING BRACKET matches the
lower stud, then pull the BASE UNIT down until it is securely seated.
Wall Mounting
MANUAL(430-0102-)V3.p65 02-10-23, 11:30 12