Audio-Technica ES961 - Manual (Page 2)

ES961 SPECIFICATIONS †
ELEMENT Fixed-charge back plate
permanently polarized condenser
POLAR PATTERN Half-cardioid
(cardioid in hemisphere above
mounting surface)
FREQUENCY RESPONSE 30-20,000 Hz
LOW FREQUENCY ROLL-OFF 80 Hz, 18 dB/octave
OPEN CIRCUIT SENSITIVITY –34 dB (19.9 mV) re 1V at 1 Pa*
IMPEDANCE 200 ohms
MAXIMUM INPUT SOUND LEVEL 134 dB SPL, 1 kHz at 1% T.H.D.
DYNAMIC RANGE (typical) 108 dB, 1 kHz at Max SPL
SIGNAL-TO-NOISE RATIO 1 68 dB, 1 kHz at 1 Pa*
PHANTOM POWER REQUIREMENTS 11-52V DC, 4 mA typical
SWITCH Flat, roll-off
WEIGHT 262 g (9.2 oz)
DIMENSIONS 108.0 mm (4.25") long,
84.0 mm (3.31") maximum width,
23.0 mm (0.91") height
OUTPUT CONNECTOR TB3M-type
CABLE 7.6 m (25.0') long, 3.2 mm (0.13")
diameter, 2-conductor, shielded
cable with TA3F-type and XLRM-
type connectors
OPTIONAL INTERCHANGEABLE UE-O omnidirectional (360°);
ELEMENTS UE-H hypercardioid (100°)
ACCESSORY FURNISHED Soft protective pouch
†In the interest of standards development, A.T.U.S. offers full details on its test
methods to other industry professionals on request.
*1 Pascal = 10 dynes/cm 2 = 10 microbars = 94 dB SPL
1 Typical, A-weighted, using Audio Precision System One.
Specifications are subject to change without notice.
8 kHz
Polar Pattern
SCALE IS 5 DECIBELS PER DIVISION
LEGEND
200 Hz
1 kHz
5 kHz
Frequency in Hertz
LEGEND 12" or more on axis
Frequency Response
Response in dB
Roll-off
Audio-Technica U.S., Inc., 1221 Commerce Drive, Stow, Ohio 44224
Audio-Technica Limited, Old Lane, Leeds LS11 8AG England
www.audio-technica.com
P51938-01 ©2007 Audio-Technica U.S., Inc. Printed in U.S.A.
1.97"
50.1 mm
3.31"
84.0 mm
0.91"
23.0 mm
2.26"
57.4 mm
1.13"
28.7 mm
2.93"
74.4 mm
4.25"
108.0 mm