Water Inc HP-RO-1000 - Manual (Page 6)

5. Connecting the Faucet
CAUTION
Water supply to the tee should have a separate
shut-off valve. If it does not, a separate shut-off
should be installed.
A. Locate the 3/8" blue tubing from the faucet and place a
mark 5/8" from the end of the tubing. Moisten the end of
the tubing with water and insert into the quick-connect
B. Gently pull back on the tubing to ensure it is connected
section off of the tubing and reconnect.
NOTE: Tubing may be quickly and easily removed from
tubing with your other hand.
INSTALLATION continued
Figure 8
A
3/8" Red
1/4" Red
1/4" White
1/4" Green
3/8" Blue
Violet
Green
Blue
Yellow
Cover Not Shown
Step 8
Step 9
Step 6
Step 11
Step 5
6 • HP-RO-1000 Undersink Reverse Osmosis System