ATEN CE-300 - Manual (Page 15)

1. Introduction
7
CE-300L / CE-300R Rear View
Note: If you are combining the CE-300 with a KVM switch, the custom KVM
cable connects back to the respective ports on the Console section of the
switch.
No. Component Description
1 Power Jack The cable from the AC Power Adapter plugs into this jack.
2 Remote I/O The Category 5 twisted pair cable that connects the
Remote and Local units plugs into this connector.
3 Console Audio
Jacks The stereo microphone and stereo speaker plugs of the
custom KVM cable supplied with this package plug into
these jacks. The jacks and plugs are color coded and
marked with an appropriate icon to indicate themselves.
4 Keyboard and
Mouse Ports The PS/2 keyboard and mouse connectors of the custom
KVM cable supplied with this package plug into these
ports. The connectors and ports are color coded and
marked with an appropriate icon to indicate themselves.
5 Monitor Port The monitor connector of the custom KVM cable supplied
with this package plugs into this port.
3
4
1 2
5