Apricorn EZ Bus DTS - Manual (Page 31)

www.apricorn.com 31
To Reformat in OS 9.x:
Caution: This will destroy any data on the hard drive. Backup any data
before you continue with the reformatting of the EZ Bus DTS hard
drive.
1. Make sure the EZ Bus DTS is plugged into the USB port.
2. Disable the file exchange in the Extensions Manager:
a. From the Apple Menu, select Control Panel, then Extensions
Manager.
b. From the list: uncheck the on/off button next to the File Exchange.
c. Click Restart.
Your Macintosh will restart and you will get the following message:
“This disk is unreadable by this computer
Do you want to initialize the disk?”
3. Enter EZ Bus DTS into the Name box.
4. From the drop down list, select Mac OS Extended and click the Initialize
button. After the drive is initialized the drive named EZ Bus DTS will appear on
your desktop.
5. To confirm that the EZ Bus DTS hard drive is properly formatted, select the EZ
Bus DTS drive, then Select: File, Get Info, General Information. The drive
should read Mac OS Extended.
6. You can now enable the file exchange extension.
a. From the Apple Menu, select Control Panel, Extensions Manager.
b. Check the on/off box next to File Exchange.
c. Click Restart.