Altec Lansing XA3021 - Manual (Page 2)

2 1
Welcome
Welcome to the extraordinary world of Altec Lansing high-fidelity
sound. The XA3021 is a 2.1 analog system that blows away the lame
speakers inside your TV. Plus, with a bass EQ mode selector, you’ll feel
the rumble of your favorite games and movies.
Great television sound isn’t all you’ll experience with the XA3021
system. With 40 watts of total system power, it delivers thrilling
performance from video gaming systems, DVD players, MP3 players,
CD players and other audio sources.
Box Contents
• 2 Satellites
• Subwoofer
• Wired Controller
• 3-Meter Stereo Audio RCA Cable, Male to Male
• 3-Meter Composite Video RCA Extender Cable, Female to Male
• AC Power Adapter
• Manual
• Quick Connect Card (QCC)
Placing Speakers
SUBWOOFER
All stereo information is heard through the satellite speakers. Because
low frequency sound is non-directional, you can place the subwoofer
anywhere you choose. However, placing the subwoofer on the floor
close to a wall or in a corner provides better bass efficiency and
optimum sound.
Warning: The subwoofer is not magnetically shielded. Therefore, it
SHOULD always be placed at least 2 feet (0.6m) from TVs, computer
monitors, computer hard drives or any other magnetic media (e.g.
floppy disks, Zip disks, VHS or cassette tapes, etc.).
SATELLITE SPEAKERS
Arrange the satellites to suit your listening tastes—from directly next
to the TV to as far apart as the speaker cords allow.
Note: The satellite speakers ARE magnetically shielded and can be
placed close to video displays such as TVs and computer monitors
without distorting the image.
Making Connections
Warning: Do not insert the speaker system’s power adapter plug into
an AC outlet until all connections are made. Also, turn off your audio
source (i.e., TV, video gaming system, DVD player or VCR) before
connecting its outputs to the XA3021’s inputs.
To ensure first-time operation as expected, please carefully follow the
connection sequence described below.
SATELLITE SPEAKERS
To set-up the XA3021 system, plug the right satellite’s orange
connector into the “RIGHT” output on the rear of the subwoofer and
the left satellite’s brown connector into the “LEFT” output on the rear
of the subwoofer.
WIRED CONTROLLER
Connect the grey-colored DIN connector from the wired controller into
the grey “CONTROLLER” jack on the rear of the subwoofer.
For easy insertion of the DIN connector, the arrow on the connector
must face up.
PRIMARY INPUTS
The primary input jacks are located on the subwoofer. Using the
supplied RCA cable, connect any audio source that has red (right) and
white (left) RCA output jacks to the XA3021’s red (right) and white
(left) RCA input jacks.
In some setup configurations, you may use the supplied composite
video (yellow) RCA extender cable to allow increased separation
between the TV and subwoofer.
Note: For the clearest sound, try muting your TV’s speakers when using
the TV as an audio source.
AUXILIARY INPUT
This auxiliary or secondary input is located on the subwoofer. Connect
any audio source that has a stereo 3.5mm plug (i.e. headphone style
jack), including portable CD or MP3 players.
Caution: Make sure the audio source features a line-out jack. This will
ensure that the output is not amplified. Check the owner’s manual for
your audio device for more information.
Note: You may need a cable that has RCA plugs on one end and a 3.5
mm stereo male plug on the other or 3.5 mm stereo plugs on both
ends. This plug may be purchased at most electronics stores.
Headphones
To use headphones with the system, plug them into one of the labeled
jacks on the end of the wired controller. When headphones are
connected, both satellites and the subwoofer are muted.
Powering On
NOTE: You must first remove the protective plastic sleeves on both
ends of the power adapter before you plug in the system.
1. After all other connections are made, plug the power adapter into the
back of the subwoofer and into an AC wall socket.
NOTE: To ensure a secure connection, the power adapter uses a locking
connector. To unlock the power adapter, don’t simply pull on the cable.
Gently pull back the connector sleeve until it releases.
2. Turn on the audio source (TV, video gaming system, DVD player or VCR).
3. Turn on the Altec Lansing XA3021 speaker system by pressing the
power button on the wired controller (see below.) A green EQ LED on
the wired controller will illuminate.
Note: To avoid hearing a popping sound when you turn on your Altec
Lansing speaker system, always turn on your audio source first.
Using the Wired Controller
For your convenience, the wired controller lets you power the system
on or off, control the volume and adjust bass equalization (EQ) (TV,
Gaming or Max-Bass).
Power
Press the “Power” button on the wired controller to turn on the speaker
system. A green EQ LED on the wired controller will illuminate, indicating
power is on. Push the “Power” button again to turn off the system.
EQ Mode
Press the “EQ Mode” selector button to cycle through the three modes
of bass equalization: TV, Gaming and Max-Bass.
TV: This setting provides normal bass response that you would expect
from standard TV programming.
Gaming: The Gaming setting boosts the bass level to highlight the low
frequency sounds of video gaming.
Max-Bass: Just as the name implies, Max-Bass supplies even more bass
for the most intense gaming experience.
Video Gaming & TV
Audio Speaker System
XA3021
The lightning flash with arrowhead, within an
equilateral triangle, is intended to alert the user to the
presence of uninsulated “dangerous voltage” within the
product’s enclosure that may be of sufficient magnitude
to constitute a risk of electric shock to persons. Caution: To prevent the risk of electric shock, do not
remove cover (or back). No user- serviceable parts
inside. Refer servicing to qualified service personnel. The exclamation point within an equilateral triangle is
intended to alert the user to the presence of important
operating and maintenance (servicing) instructions in
the literature accompanying the appliance.
SAFETY INSTRUCTIONS
Read Instructions — All the safety and operating instructions
should be read before the appliance is operated.
Retain Instructions — The operating instructions should be
retained for future reference.
Heed Warning — All warnings on the appliance and in the
operating instructions should be adhered to.
Follow Instructions — All operating and use instructions
should be followed.
Water and Moisture — The appliance should not be used near
water – for example, near a bathtub, washbowl, kitchen sink, laundry
tub, in a wet basement, or near a swimming pool, etc.
Outdoor Use — Warning: To reduce the risk of fire or electric
shock, do not expose this appliance to rain or moisture.
Location — The appliance should be installed in a stable location.
Ventilation — The appliance should be situated so that its
location or position does not interfere with its proper ventilation. For
example, the appliance should not be situated on a bed, sofa, rug, or
similar surface that may block the ventilation openings; or placed in a
built-in installation, such as a closed bookcase or cabinet that may
impede the flow of air through the ventilation openings.
Heat — The appliance should be situated away from heat sources
such as radiators, heat registers, stoves, or other appliances (including
amplifiers) that produce heat.
Power Sources — The appliance should be connected to a power
supply only of the type described in the operating instructions or as
marked on the appliance.
Power-Cord Protection — Power-supply cords should be
routed so that they are not likely to be walked on or pinched by items
placed upon or against them. Pay particular attention to cords at
plugs, convenience receptacles, and the point where they exit from the
appliance.
Grounding or Polarization — The precautions that should
be taken so that the grounding or polarization means of an appliance
is not defeated.
Cleaning — The appliance should be cleaned only with a polishing
cloth or a soft dry cloth. Never clean with furniture wax, benzene,
insecticides or other volatile liquids since they may corrode the cabinet.
Non-Use Periods — The power cord of the appliance should be
unplugged from the outlet when left unused for a long period of time.
Lightning Storms — Unplug the appliance during lightning storms.
Object and Liquid Entry — Care should be taken so that
objects do not fall and liquids are not spilled into the enclosure
through openings.
Accessories — Only use attachments/accessories specified by the mfg.
Damage Requiring Service — The appliance should be
serviced by qualified service personnel when:
• The power-supply cord or the plug has been damaged.
• Objects have fallen, or liquid has been spilled into the appliance.
• The appliance has been exposed to rain.
• The appliance does not appear to operate normally or exhibits
a marked change in performance.
• The appliance has been dropped or the enclosure damaged.
Servicing — The user should not attempt to service the appliance.
Servicing should be referred to qualified service personnel or returned
to the dealer or call the Altec Lansing service line for assistance.
TWO YEAR LIMITED WARRANTY
Altec Lansing Technologies, Inc. warrants to the end user that all of its
PC audio, TV or gaming speaker systems are free from defects in
material and workmanship in the course of normal and reasonable use
for a term of two years from the date of purchase.
This warranty is the exclusive and only warranty in effect relative to
Altec Lansing PC audio, TV or gaming speaker systems and any other
warranties, either expressed or implied, are invalid. Neither Altec
Lansing Technologies, Inc. nor any authorized Altec Lansing
Technologies, Inc. reseller is responsible for any incidental damages
incurred in the use of the speakers. (This limitation of incidental or
consequential damage is not applicable where prohibited.)
Altec Lansing Technologies, Inc.’s obligation under this warranty does
not apply to any defect, malfunction or failure as a result of misuse,
abuse, improper installation, use with faulty or improper equipment or
the use of the speaker systems with any equipment for which they
were not intended.
The terms of this warranty apply only to PC audio, TV or gaming speaker
systems when such speakers are returned to the respective authorized
Altec Lansing Technologies, Inc. reseller where they were purchased.
Under the terms of this warranty, the original consumer purchaser has
certain legal rights and may have other rights, which vary worldwide.
CAUTION
To prevent electric shock do not use this (polarized) plug with an
extension cord, receptacle or other outlet unless the blades can
be fully inserted to prevent blade exposure.
WARNING
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT
EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.
Connecting the Power Cord (AC Wall Socket)
Long slot is neutral
(ground) side.
Insert the wide blade
into the ground side slot.