Canon VIXIA mini - Manual (Page 60)

60
Basic Recording
• Observe the following precautions while the ACCESS
indicator is on or flashing. Failing to do so may result in
permanent data loss or damage to the memory card.
- Do not remove the memory card.
- Do not disconnect the power source or turn off the
camcorder.
- Do not press the ^ button.
• Be sure to save your recordings regularly (A 131),
especially after making important recordings. Canon
shall not be liable for any loss or corruption of data.
• If a subject is too close to the camcorder, it may not be
able to focus correctly. You can set the shooting mode
to
(A 90) to be able to focus a subject at a dis-
tance of only 20 cm (7.9 in.) from the camcorder.
• If 1 > q > [Auto Power Off] is set to [i On],
the camcorder will shut off automatically to save power
when it is powered by a battery pack and is left without
any operation for 3 minutes. Should this happen, set
the power switch to OFF and then ON again to turn the
camcorder back on.
COP
Y