ZAGG ZAGGsparq 1220, 3100, & 6000 - Manual

USE & COMPATIBILITY
To charge the ZAGGsparq, plug it into a standard wall outlet. To charge your device,
plug the USB end into the ZAGGsparq and make sure the switch is in the ON position.
The ZAGGsparq is designed to charge virtually any device that draws a charge
from USB. However, some USB charged devices may have proprietary charging
specifications. The ZAGGsparq has been designed to charge smartphones and
tablets including the iPhone® and iPad® as well as Android™ smartphones and tablets.
WARRANTY
Please visit www.ZAGG.com/register to register your ZAGGsparq. The ZAGGsparq
is covered by a one-year warranty against any potential manufacturing defects.
Your ZAGGsparq is automatically registered if you purchased it from www.ZAGG.com
CUSTOMER SERVICE
If you have any questions or concerns, please contact ZAGG’s customer service
via email at [email protected] or by phone at 1-800-700-ZAGG (9244).
WARNINGS
• Do not store the ZAGGsparq near a high temperature environment, including
intense sunlight, heat or fire.
• If the ZAGGsparq is ever damaged, including dents, punctures, tears, deformities
or corrosion, due to any cause, discontinue use and contact ZAGG, or dispose of
it in an appropriate manner at your local battery recycling center.
• Do not expose the ZAGGsparq to moisture or submerge it in liquid. Keep the
ZAGGsparq dry at all times.
• Incorrect disposal of batteries, including the ZAGGsparq, is unlawful under state
and federal environmental laws and regulations. Always take used batteries to
your local battery-recycling center.
Congratulations on your purchase of the ZAGGsparq™,
another award-winning product from ZAGG®. We have
considered every detail in redesigning the ZAGGsparq,
and we are thrilled to introduce the new design to you.
DESIGN
The polycarbonate shell design allows the ZAGGsparq to maintain a glossy outer
finish without showing fingerprints or scratches and a soft-touch rubber underside
allows the charger to fit comfortably in your hand.
A button on the side of the ZAGGsparq lights up 5 LEDs to indicate the power
level, and a convenient on/off switch prevents the battery from draining when not
in use.
The convenient built-in prongs on the ZAGGsparq provide two major benefits other
portable chargers don’t offer: 1) No extra cables to deal with for charging the
ZAGGsparq, and 2) Allows the ZAGGsparq to double as a wall charger.
SPECS
Battery type: Lithium polymer
LED charge levels:
5 LEDs = 80 to100%
4 LEDs = 60 to 79%
3 LEDs = 40 to 59%
2 LEDs = 20 to 39%
1 LED = Less than 20%
ZAGGsparq 3100
Battery size: 3100 mAh
Current output: 5V at 2.1A
USB ports: 1
ZAGGsparq 6000
Battery size: 6000 mAh
Current output: 5V at 2.1A
USB ports: 2
All rights reserved ©2012 ZAGG Inc. ZAGGsparq is a trademark of ZAGG IP Holding Company Inc.
MADE IN CHINA
ZAGGsparq 1220
Battery size: 1220 mAh
Current output: 5V at 1A
USB ports: 1