Satechi Bluetooth Wonder Wireless Stereo Receiver Headset - Manual

1 2 USER GUIDE USER GUIDE
Product Overview
The BT Wonder Stereo Headset contains the following
components and functions:
- Multi-Function (MF) Button
- Microphone
- USB Charging Jack (with cable)
- Play / Pause button
- Previous Track button
- Next Track button
Charging the headset
Your headset uses a rechargeable battery. You must charge
the battery completely before its first use. Please ensure that
the headset is turned off before charging.
1. Plug the USB charging cable into the port of the headset
2. The red indicator light will remain solid when charging.
3. A full charge will take approximately 2-3 hours.
4. The indicator light will be appear blue on a full charge.
Turning the headset on/off
Turning on: press and hold the MF button until a beep sounds
and the blue indicator light flashes
Turning off: press and hold the MF button until a beep sounds
and the blue indicator light flashes twice
Pairing with your Bluetooth phone
1. For best performance, the Bluetooth headset should be
within a few feet of your Bluetooth phone.
2. Ensure that the headset is off.
3. Press the MF button until the blue indicator light appears a
solid blue.
4. Allow your Bluetooth phone to discover the headset (refer
to your phone’s user guide). Typically, this can be adjusted
in the “settings” option of your phone.
5. Your phone will now attempt to find the headset and will
ask if you want to pair it. Confirm the pairing.
6. When asked, enter the passcode “0000” and confirm
IMPORTANT If pairing is successful, the indicator light will
flash blue 10 times rapidly before going into flashing every 3
seconds. If pairing is unsuccessful, the light remains on and
you will need to reattempt the pairing. The light will turn off if
the pairing time takes longer than 60 seconds - in this case,
you will need to turn off the headset and turn it on for pairing
again.
Disconnecting the headset from your phone
If you want to disconnect the headset from your phone, you
may do one of the following:
- Turn the headset off
- Remove the headset from the Bluetooth list on the phone
- Move the headset away from the phone for a distance of
more than 30 feet
- Headphones
- Earbuds
- Indicator Light
- Volume Down button
- Volume Up button
3
Reconnecting the paired headset with your phone
If you want to connect the paired headset with your mobile
phone, do one of the following:
- Turn the headset on and select the headset on the Bluetooth
list of your phone
- Press the MF button on the headset once (automatic pairing
must be activated in your phone)
Answering a call
When you hear a phone call through the headset, press the
MF button once to pickup. If you prefer answering a call
through your phone without the headset, you can transfer the
call from the headset to your phone.
Ending a call
Press and release the MF button once to end the call or hang
up from your phone’s keypad.
Answering or rejecting a call when listening to music
If there is an incoming call when you are listening to music
from your phone or other Bluetooth device, press the MF
button to answer the call or press and hold for 2 seconds to
reject the call.
Pause or put a call on hold
During a phone call, press and hold the MF button for 2
seconds to put a call on hold. Press and hold the MF button
again for 2 seconds to resume (subject to the phone’s ability)
4
Redialing the previous number
Press and hold the MF button for 2 seconds until a long beep
sounds.
Playing music
When listening to music, press the button to play or pause
a track. To skip to the next track press the button and to
skip to the previous track press the button.
Volume Control
Press the button to increase the volume; press the
button to decrease the volume.