KYORITSU KEW Windows for KEW 6305 Windows 8 - Manual

2
1
Installation Manual for Windows 8
KEW Windows for KEW6305
KEW6305
If you are using Windows 8(32/64bit), install the special
software “KEW Windows for KEW6305” supplied with
KEW6305 before starting to communicate with the
instrument.
* Internet access is required to install “KEW Windows
for KEW6305” on Windows 8.
* Before installing this application software, the following
three should be installed: 1."KEW WindowsV2",
2."KEW Windows for KEW6305" and 3. USB driver.
That is, three different installation procedures should
be done.
1. Introduction
● Interface
This instrument is equipped with USB and Bluetooth interfaces.
Communication method : USB Ver2.0
Bluetooth : Bluetooth Ver2.1+EDR (Class2)
Compliant profile: SPP
Following can be done by USB/ Bluetooth communication.
* Downloading files in the internal memory of the instrument
to a PC
* Making settings for the instrument via a PC
* Displaying the measured results on a PC as graphs in real-
time.
･OS(Operation System)
For supported OS, please check the version label of the CD
case.
･Display
1024 × 768 dots, 65536 colors or more
･HDD (Hard-disk space required)
1Gbyte or more (including Framework)
･.NET Framework (3.5 or more)
●Trademark
･ Windows® is a registered trademark of Microsoft in the
United States.
･Bluetooth is a registered trademark of Bluetooth SIG.
The latest software is available for download from our homepage.
http://www.kew-ltd.co.jp
2. Installing the “KEW Windows for KEW6305”
(1) Followings shall be checked before installing the software.
･ To prepare your system to install this software, please close
all open programs.
･ Be sure NOT to connect the instrument with a USB until
installation completes.
･ Installation shall be done with Administrator right.
･ To use KEW Windows for KEW6305, .NET Framework 3.5
is required.
If .NET Framework 3.5 is not installed in your PC, it will be
automatically installed when installing this application.
Internet connection is required to install .NET Framework 3.5.
(2) Insert the CD-ROM in your PC's CD drive. Then following pop-up
will appear at the upper right on the screen. Left-click on this box.
Click and select “Run
KEWSetupLauncher2.
exe" when the following
box appears.
If User Account Control
dialog box appears, click
"Yes".
If above dialog box does not appear, run “KEWSetupLauncher2.
exe” from the CD.
(3) Read through and understand the License Agreement and
click “ I accept….”, and then click“ Next”.
(4) Click “Next” after entering the user information and other
supplementary information.
(5) Confirm the information on installation, and then click“ Install”
to start an installation.
The following box will appear if .NET Framework3.5 is not
installed in your PC.
If a message requiring restarting your PC is displayed, click "Yes"
and restart your PC. Run "KEWSetupLauncher2.exe" from the
CD after restarting the PC. Restarting your computer is essential
to install the application properly.